backwoods25
Junior Member
Let's get drunk and race rc cars
Posts: 91 
|
Post by backwoods25 on Nov 2, 2013 2:43:57 GMT -5
Anybody have any experience with novak?
|
|
|
|
Post by mbreeden on Nov 3, 2013 20:18:44 GMT -5
Holdren does.
|
|
|
|
Post by davidholdren on Nov 3, 2013 21:51:38 GMT -5
That i do
|
|
backwoods25
Junior Member
Let's get drunk and race rc cars
Posts: 91
|
Post by backwoods25 on Nov 5, 2013 13:45:33 GMT -5
I just got another pulse vulcan combo and the esc keeps throwin a damn locked rotor code. it spins free but I gotta spin the motor to get it to turn sometimes. I'm kinda aggravated about it cause it's brand new. I've thought maybe it was my radio and the esc calibration but hell I've recalibrated it a million times and it blinks green and it should be ready to go.
|
|
|
|
Post by speedy1234 on Nov 5, 2013 23:53:00 GMT -5
Make sure the A B C wires are connected in order from the esc to the motor.
|
|
backwoods25
Junior Member
Let's get drunk and race rc cars
Posts: 91
|
Post by backwoods25 on Nov 6, 2013 0:47:39 GMT -5
I've unsoldered them then resoldered just to make sure they are right. Went back thru the recalibration and it started turnin when I hit the throttle. I tapped the brake then hit the throttle and it threw the same code again. I sent novak a email today supposed to hear somethin tomorrow maybe but if not I guess I'll be makin a phone call. It's frustration as hell
|
|
|
|
Post by speedy1234 on Nov 6, 2013 22:28:02 GMT -5
Sounds like the sensor board or sensor cable is bad
|
|
backwoods25
Junior Member
Let's get drunk and race rc cars
Posts: 91
|
Post by backwoods25 on Nov 7, 2013 1:32:51 GMT -5
I might order both of them they are kinda cheap I was thinkin it could be one of the two myself.
|
|
|
|
Post by paulmorehead on Nov 7, 2013 4:30:04 GMT -5
It's also a good idea to keep the motor wires to the esc the same length too. Just throwing that out.
|
|
backwoods25
Junior Member
Let's get drunk and race rc cars
Posts: 91
|
Post by backwoods25 on Nov 8, 2013 2:44:24 GMT -5
Yea I didn't cut them just the battery wires
|
|
